MENU
Logo Made in Germany DOMOTEX asia / CHINA FLOOR 2018

Carl Prinz GmbH & Co. KG

Booth number: W1F-13

www.carlprinz.de
service@carlprinz.de

About us

Carl Prinz GmbH & Co. KG is a midsize family company based in Goch, Germany. We specialise in the development and manufacture of profile systems in the flooring technology sector.

In collaboration with partners in industry, trade and commerce, the Prinz Development Department creates innovative products which simplify the laying of floor coverings, perfect their visual impact and are suitable for universal use.

Thanks to our pioneering product systems we set new standards in the floor/wall/ceiling sector and are the No. 1 partner for our customers as well as for architects and planners.

“Strong connection. Smart technology.” is our motto and our daily endeavour.

Prinz specialises in the development of intelligent profile systems for floors, walls and ceilings. User friendliness, safety, and perfect design are always the highest priority.

Numerous product patents attest to this. Our long-term commitment is to an innovative company culture and top quality.



Products and services

  • Profiles for floor coverings
  • Connection sections
  • Expansion joint sections
  • Adaptation sections
  • Border sections
  • Angle edges and stair nosings
  • Corner protective angles
  • Door bottom sealants
  • LED channels
  • Skirting boards
  • Laying accessories
  • Impact sound insulation and parquet underlays
PS 400 screw profile system

PS 400 screw profile system

The PS 400 Profile system combines the upper and base profile with self-cutting screws. This is innovative and advantageous. The all around contact of the self-cutting screws guarantees optimal traction in the screw base. The patented PS 400 system is extremely resilient and it is remarkably easy to install. The profiles continuously fit to the flooring in the height and inclination and automatically seal up. Lay on the upper profile and tighten the screws; laying was never so fast and secure.

www.carlprinz.de/en/products/profiles-for-floorings/...

PROFI-DESIGN clips profile system

PROFI-DESIGN clips profile system

The Prinz PROFI-DESIGN section system was specially developed for floating installation of design floorings, 4 mm thick and above. The curved-toothed tie-bars of the top section snap safely in the trapezoidal slots of the base section. This enables the top section to tilt easily and to adapt automatically to the height and inclination. The discreet and shallow top sections skilfully draw attention to the floor design while providing ample room for the extension joints.

CULTUS 45 aluminium clip skirting boards

CULTUS 45 aluminium clip skirting boards

Not horizontally or vertically, but at an angle of 45 degrees: this is the fastening technique for the new aluminium skirting board "Cultus45". This prevents damage of the wall and floor when installing the skirting. Only in its very final position the skirting gets in contact with wall and floor. The fixing clip has a large reservoir for laying cables. The bars of the aluminium skirting are held in place without interlocking. As a result, the skirting can be loosened easily and without damage.

News & Innovations

Aluminium skirting board 

Not horizontally or vertically, but at an angle of 45 degrees: this is the fastening technique for the new aluminium skirting board "Cultus45". This prevents damage of the wall and floor when installing the skirting. Only in its very final position the skirting gets in contact with wall and flo...| » Further reading 


LED channel 

LED technology opens up possibilities in lighting design which would have been unimaginable years ago. A high luminous efficiency with low cost and long life are tangible economic benefits. Simple ways of lighting control and new concepts with colored or white light upgrade LED technology to a d...| » Further reading 


LPS Design Profile system - Visually discreet and extremely versatile 

Design floorings have excellent properties. They are hard-wearing, insensitive to moisture, they create pleasant room acoustics along with a high level of walking comfort. LPS DESIGN is a two-piece screw profile system for the installation of design floorings with construction heights of 3.5&nda...| » Further reading 


Contacts

Address
Carl Prinz GmbH & Co. KG
Von-Monschaw-Str. 5
47574 Goch
Germany

Phone: +49 2823 9703-0
Fax: +49 2823 9703-99

Ralf Giebels
Head of internal sales department
Phone: +49 2823 9703-34
ralf.giebels@carlprinz.de


Business matching
Get in contact with German companies in 3 easy steps! With one single question you can reach all relevant German Pavilion exhibitors of your selected industrial branch.

Click here if you notice an image that violates copyright or privacy rights.

Your personal organizer

Your personal organizer

Print list  |  Save as PDF
This is your personal organizer to manage your contacts to the German exhibitors.